First folding solid knife on the world
Commonly is known that no folder on Earth is tough as a fixed blade. This is very true but we came close. Pivot pin is hardened to 59 HRC, scales are stainless steel at 54 HRC and the stop pin is 6 mm cylinder tungsten carbide raging over 70 HRC! This knife is as tough as it possibly can be.
Luxury in your hand
All this would be nothing if the blade steel was not a premium choice for toughness, hardness and edge-holding. We chose RWL-34 hardened at 60 Rockwel (but in serial knife this is going to be even higher) so the edge lasts long as an eternity. The scales on the hardened steel are 6Al4V heat anodized Titanium, combining the best of liner lock and frame lock. Smooth action on the stainells steel bearings, perfect lockup and smooth detent is a must.
Perfect fitting
We wanted to fuse the best of fixed blade in a compact design, so it is reliable and practical. Please notice that the blade is very close to handle highly decreasing leverage needed to cut. We chose hole instead of thumbstud so nothing is in the was of unbelievable sharp 3.5 inch (89mm) blade. We are sure that You have never heard sound like this when flick-opening a knife, the rock-solid, very deeply premeditated construction does its job at deep, rock on rock like sound. We will never compromise on the strenght of the knife and this helps You to reach further. Making tolerances are tighter than 0.01mm (0.0003937 inch) and every pin is pressed in secured by screws. The hardened scales are 3 mm thick (0.118 inch) and 3 mm blade.
